Wheel Offset Guide

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
TOMSUN
Group buy King
Posts: 2390
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Wheel Offset Guide

Post by TOMSUN »

Just trying to summarise peoples experiences with Wheel Offset onto a single post.

********** NARROWBODY SPECS ***********************

Stock Starion (JA): 14x6.5 +18 (195/70/14)
Stock Starion (JB): 15x6.5 +18 (215/60/15)

http://www.1010tires.com/WheelOffsetCalculator.asp
http://www.rimsntires.com/specs.jsp

19's

Mick:
-ROH Modena
Tomsun,

19s fit with coilovers and if really low will need 1.5" guard pump each back side.

215/30/19 on 8.5" rim +12 front
245/25/19 on 10" rim +12 rear

Comments: With stretched tyres and approx 2 inches of pumping, rolling and cutting the rear wheels just fit. Fronts need rolled guards to lower and are close to coil over adjusters but clear by about 4mm. D2's may be different though.


18's

KIT:
FRONT: 18X8.5 +12mm offset.Tyres 225/40/18
REAR: 18X10 +12 offset. Tyres 265/35/18
Guards are rolled
http://forums.austarion.com/viewtopic.php?t=6438

TomVR4
FRONT: 18x8.5 +29 with 25mm spacer = +4mm offset adjusted. 235 tyres.
REAR: 18x8.5 +29 with 8mm spacer? = +21 offset adjusted. 235 tyres.
Note: The front right just scrapes on the guard every now and again on full lock.

silo: (work meister S1's)
FRONT: 18x10 +18. Tyres 245/40/18
REAR: 18x11 -7. Tyres 295/30/18
NOTE: Running big flairs

perrinsohc
http://forums.austarion.com/viewtopic.p ... &start=105

Front:
Tyres: 245/35/18
Spacers: 25mm (to get off the strut) coilovers
Wheel: 18x10 15+ offset (make a -10 offset when combined with spacer)

Rear:
Tyres: 255/35/18
Spacers: 15mm (need more)
Wheel: 18x10 15+ offset (make a 0 offset when combined with spacer)
Has a nice small stretch look so prefect for this application. Got some rub on a big bump in the road
Rolled guards all round

17's

FST4RD:
FRONT: 17x8 with a 0 offset. 215's no rubbing
REAR: 17x8 with a 0 offset. 235's. no rubbing

kiwi_EX:
FRONT: 17x8 with a 0 offset. 235/45/17
REAR: 17x8 with a 0 offset.
The 235/45's fit under the front guards ok and no touching on the inside when at full lock, just catch ever so slightly on the inside edge at the bottom of the front guard when turning. Probably only catching by 5mm.

redzone: Orange JA.
FRONT: 17X9 0mm offset. 225/45/17 fit fine. Note: 2 degrees neg camber.
REAR: 17X9 0mm offset. 225/45/17.

NachoMan: GSR-V. (5 stud) Current.
FRONT: 17x8 +5 offset. 235/45/17. Fine
REAR: 17x8 +5 offset. 235/45/17. Fine

NachoMan: GSR-V. (5 stud) Previous.
FRONT: 17x7.5 +3 offset. 235/45/17. Fine
REAR: 17x7.5 +3 offset. 235/45/17. Fine

jedi: Dtm drift pics below
FRONT: 17x9 +15 with 5mm spacer = +10 offset. Tyres 235.
REAR: 17x10 +12. Tyres 255.
http://www.dtmwheels.co.nz/wheels/view/wheel/5/drift/

redzone: White JB
FRONT: 17X7 +15mm.
REAR: 17X8 +15mm.
http://forums.austarion.com/viewtopic.php?t=10209

TOMSUN: (D2 Coilovers)
Set 1 (Zenki Drift Wheels)
http://forums.austarion.com/viewtopic.php?t=12168
FRONT: 17x8 +15 offset. Tyres 225/45/17. (235/45/17's DO NOT FIT. THEY TOUCHED THE STANDARD SPRING PERCH.) Tyre just touch on the 225's with D2 Coilovers. Going to try a 5mm spacer or a 215/45/17 tyre.
REAR: 17x9 +15 offset. Tyres 255/40/17. Fit nice with standard suspension and D2's

TOMSUN: Set 2 (WedsSport DP-V7's - 3 Piece)
FRONT: 17x7.5 +16 offset. Tyres 225/45/17. Would clear stock suspension but will probably touch spring
REAR: 17x8.5 +16 offset. Tyres 235/40/17.

TOMSUN: Set 3 (Veilside Andrew Copies)--- SOLD TO www.18u
FRONT: 17x7 +20 offset. Tyres 225/45/17.
REAR: 17x7 +20 offset. Tyres 225/45/17.

TOMSUN: Set 4 (Mesh)---Fronts fit nice. Rears needs lips rolled and inner tubs to be "massaged", a +6 on the rears would have been "smarter" :)
FRONT: 17x9 -12 offset. Tyres 225/45/17.
REAR: 17x10 +0 offset. Tyres 255/40/17.

dr death
rota RB 17X8.5 +4's on his JB they fit nicely
What Tyres???

niss720
17x8 drift teks with +30 offset and 30mm bolt on spacers; wrapped in 215/45 tyres
http://forums.austarion.com/viewtopic.p ... 8&start=15


16's

MR Bender: (rota grids)
FRONT: 16x8 +10 offset. 225/50/16
REAR: 16x8 +10 offset. 245/50/r16
http://forums.austarion.com/viewtopic.php?t=9873
Note: no clearance issues what so ever!! they fit great!! the guards need to be rolled to go lower. but its low as is anyway!

thrash:
FRONT: 16x7 +13 offset. Tyres 205/45/16.
REAR: 16x8 +11 offset. Tyres 215/40/16.
http://forums.austarion.com/viewtopic.p ... sc&start=0

Alspos:
FRONT: 16x7 +20 (225/50/16) as close on the front as you'd want to go
REAR: 16x7 +20 (225/50/16) Fine.

RiceThief:
FRONT: 16x7 +24 offset. 225/50/16 tyres just clear the strut with lowered king springs.
REAR: 16x7 +24 offset. 225/50/16 tyres

enthuzed
FRONT: 16x7 +20. With 225/50/16 tyres.
REAR: 16x7 +20. Also 225/50/16 tyres.
Heaps of room for the rears, but there's only about 6mm between either the weld on the leg for the spring retainer or between the corner of the tyre and lowest outer edge of the spring retainer. Note, this is a standard strut.

15's

Prozac (D2 Coilovers)
FRONT: 15x9, ET0. 225/55/15 (Need to be spaced out 5mm to clear spring. Running 15mm spacer)
FRONT: 15x9, ET0. 225/55/15 (Running 25mm spacer to match front not to clear springs)
Guards rolled front and back
http://forums.austarion.com/viewtopic.p ... s&start=90


14's

enthuzed
Checked out the aftermarket 15x7 wheels too, they are the same as Noddy's two-tone JB in the pictures section of this site.
FRONT: 15x7 +16. With 215/60 tyres.
REAR: Same as the front.


14's

TOMSUN: Set 4 (ROH off a Datusn 1200)
FRONT: 14x6 +24 offset. Tyres 195/60/14. Fit ok. Note the don't fill the guards at all.
REAR: 14x6 +24 offset. Tyres 205/60/14.


********** WIDEBODY SPECS ***********************


MrBishi:
FRONT: 18x8.5 +8. Tyres 245/35/18
REAR: 18x10 -5. Tyres 275/35/18
Note: Front guards need to be rolled
http://forums.austarion.com/viewtopic.php?t=11339


JAS:
FRONT: 18 x 10.5 +3 offset. Tyres 235/40/18
REAR: 18 x 11.5 -16 offset Tyres 265/35/18

Image


IVAN (USA): Set 4 (OS Formula Mesh)- Nice fittment.
FRONT: 17x9 -12 offset. Tyres 225/45/17.
REAR: 17x10 -18 offset. Tyres 255/40/17.
Last edited by TOMSUN on Thu Aug 21, 2014 7:32 pm, edited 33 times in total.
1985 JB Starion #157
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

I'd like to add, i've fitted 16x7 with a +24 offset and 225/50 tyres and they just clear the strut with lowered king springs.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yes 7's will fit on the front with +25 offset. thats the limit.


also that quote from charlie at the end of your post tom is about WIDEYS not narrowbodies....
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
TOMSUN
Group buy King
Posts: 2390
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

Thanks guys, that the sort of info that I'm after to try and compile here. :beer
1985 JB Starion #157
User avatar
TomVR4
I love starions
Posts: 353
Joined: Wed Sep 13, 2006 8:52 am
Location: Perth

Post by TomVR4 »

I've got 18's x 8.5 with 235 tyres all round. they are +29 offset with a 25mm spacer on the front and a 10 or 8mm spacer on the rear. so +4mm offset on the front. The front right just scrapes on the gaurd every now and again on full lock, (front right is slightly lower than front left.. :wtf: ). Does kit run coil overs or just standard struts? As I didn't think that I had much room left with the standard struts.
G6E Falcon Turbo (stock)
XJ Jeep Cherokee (5" lift, muddies, lockers etc)
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

they're factory adjustable platform struts that have even less room than the original setup... orig size springs.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

My GSR-V ran 17x7.5's all round with an offset of +3 a little while ago.
Now she has 17x8's all round with an offset of +5
Tyre size is 235/45/17 all round
It's 5 stud though, but that shouldn't make too much difference...
User avatar
jedi
I like starions more
Posts: 159
Joined: Thu Nov 30, 2006 4:02 pm
Location: christchurch

my new rims

Post by jedi »

running 17"x10 255 on back 17'sx9 235 on front had to run a 5mm spacer on fronts

Image

Image

:beer
Last edited by jedi on Mon Jan 05, 2009 7:30 pm, edited 1 time in total.
JayME
Big Dorifto
Posts: 77
Joined: Sun Dec 02, 2007 1:34 pm
Location: Christchurch, NZ

Re: my new rims

Post by JayME »

jedi wrote:running 17"x10 255 on back 17'sx9 235 on front had to run a 5mm spacer on fronts
nice :drool: - Dtm drift's i take it - have been thinking about them for mine for some time

What offset you running?
User avatar
jedi
I like starions more
Posts: 159
Joined: Thu Nov 30, 2006 4:02 pm
Location: christchurch

hmm

Post by jedi »

I think we worked it out 15p on front 12p on back if that means anything.
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

:drool: sex on wheels..... :beer
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
STARZILA
I love starions
Posts: 394
Joined: Thu Aug 18, 2005 7:15 pm
Location: Auckland New Zealand

Post by STARZILA »

http://www.trademe.co.nz/Trade-Me-Motor ... 595345.htm

What about these on my 5 stud EX?

Looking at changing my KOYA DRIFT TEK's
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

guys, we should probably keep references to wheels that need spacers out of this thread, otherwise it defeats the whole purpose of the thread..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
STARZILA
I love starions
Posts: 394
Joined: Thu Aug 18, 2005 7:15 pm
Location: Auckland New Zealand

Post by STARZILA »

redzone wrote:guys, we should probably keep references to wheels that need spacers out of this thread, otherwise it defeats the whole purpose of the thread..
So these wont go straight on? theyre 17p and my factory mags are 18p???
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

STARZILA wrote:So these wont go straight on? theyre 17p and my factory mags are 18p???
No it wont because offset by itself isnt the only indicator of whether the wheels will fit. Because those rims you listed are 9 inch wide, with an offset of 17 + gives a backspace of 131, which wont fit on the front of a starion without hitting the struts.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest